VIOFO Hardwire Kit (HK4 FULL-SET) for A119 MINI /2 | A229 /DUO/PLUS/PRO | T130 | WM1

Roll over image to zoom in Click on image to zoom

VIOFO Hardwire Kit (HK4 FULL-SET) for A119 MINI /2 | A229 /DUO/PLUS/PRO | T130 | WM1

Name: VIOFO Hardwire Kit (HK4 FULL-SET) for A119 MINI /2 | A229 /DUO/PLUS/PRO | T130 | WM1
Brand: VIOFO
SKU: VO-HK-4-FL
Price: 16.85 CHF
Availability: InStock

Save CHF 4.22

VIOFOSKU: VO-HK-4-FL

Price:

CHF 16.85 CHF 21.07

Tax included Shipping calculated at checkout

Quantity:

Pickup available at Lager Berlin

Usually ready in 24 hours

Share this product

With this hardwire kit you can use the dashcamConstantly supply with electricity. So you can also leave the camera on at night. This kit is for vehicles withVoltage levels from 12 to 24 voltsSuitable.

Thanks to ACC Detection, this hardwire kit immediately detects whether the car is parked.

Then the dashcam switchesAutomatically into the parking modeSo that the dashcam remains on! As soon as the vehicle is restarted, the dashcam switches to normal power. This kit isOnly suitableFor the VIOFO T130 2CH / 3CH, die VIOFO A229 SIngle / Duo, VIOFO A119 Mini / Mini 2, VIOFO A229 Plus 1CH/2CH / 3CH, VIOFO A229 Pro 1CH/2CH / 3CH and VIOFO WM1!

The Hardwire KitSupports three parking mode typesAs well as automatic event detection, time-lapse, and low-bitrate recording. The hardwire kit works until the percentage of the car battery falls below a certain value (customizable), then the dashcam turns off.

Notes:

Order this hardwire kit only for the VIOFO T130 2CH / 3CH, die VIOFO A229 SIngle / Duo, VIOFO A119 Mini / Mini 2, VIOFO A229 Plus 1CH/2CH / 3CH, VIOFO A229 Pro 1CH/2CH / 3CH and VIOFO WM1!

For the other VIOFO models, you can use theAlternative kitsOrder.

The backup attachments areHereIncluded
(Two attachments per type are required for operation)

We recommend that theInstallation of the hardwire kit is carried out by a specialist workshop.

Full 24 months warranty , email replies within 24 hours and 100% satisfaction guaranteed.

Note 1:

If you want to use a Type-C port on the rear-view mirror or in the car for power supply, you will need an additional USB-C to USB-A adapter for the original VIOFO USB-C cable. The USB-C adapter must be connected to the car's port. USB-C to USB-A and then USB-A to USB-C cable can be used; with a direct connection from the car's USB-C port to the dashcam, it will not start.

Note 2:

To ensure that the camera works properly, please use the original VIOFO cable / VIOFO car charger cable. You can also avoid interference from the original SD cards.

Note 3:

In parking mode, we recommend using VIOFO Hardwire Kit cable to power the camera. If a power bank is used to power the parking mode, it may cause the parking mode to be unstable.

VIOFO Hardwire Kit (HK4 FULL-SET) for A119 MINI /2 | A229 /DUO/PLUS/PRO | T130 | WM1

Description

Thanks to ACC Detection, this hardwire kit immediately detects whether the car is parked.

Note 1:

Note 2:

Note 3:

VIOFO Hardwire Kit (HK4 FULL-SET) for A119 MINI /2 | A229 /DUO/PLUS/PRO | T130 | WM1

recommendations for you

last seen