VIOFO A229 Plus / Pro rear camera with adhesive pads
VIOFO A229 Plus / Pro rear camera with adhesive pads
Roll over image to zoom in Click on image to zoom
VIOFO A229 Plus / Pro rear camera with adhesive padsVIOFO A229 Plus / Pro rear camera with adhesive pads

VIOFO A229 Plus / Pro rear camera with adhesive pads

VIOFOSKU: VO-A229-HK0M-1CH
Price:
CHF 46.05

Tax included Shipping calculated at checkout

Pickup available at Lager Berlin

Usually ready in 24 hours

Description

A new A229 Pro/Plus 2CH/3CH is already delivered with the rear view camera

  • 2K rear camera with Sony STARVIS 2 IMX675 5MP sensor
  • Rear: F1.9 aperture, FOV=160°
  • Only for A229 Pro/Plus

1x A229 Plus / Pro rear camera

1x 2x replacement adhesive pads

1x packaging box

Full 24 months warranty , email replies within 24 hours and 100% satisfaction guaranteed.

  • Channel: 1-Channel
  • Resolution: 1440p at 30 frames per second
  • Image sensor: Sony STARVIS 2 Sensor 5MP IMX675
  • Lens: F1.9 Aperture
  • Chipset: ---
  • HDR: Supported
  • Shooting angle: 160 degrees
  • LCD screen: ---
  • GPS receiver: ---
  • G-Sensor: ---
  • Motion detection: Built-in
  • Parking mode: Available
  • Loop recording mode: Supported
  • Bluetooth-compatible: ---
  • WLAN frequency: ---
  • Voice control: ---
  • Voice notification: ---
  • Microphones: ---
  • Speaker: ---
  • Memory card: ---
  • Video output: Type-C USB / USB-C
  • Frequency: 50Hz / 60Hz
  • Video format: H.264
  • Dimensions (LxWxH): 7cm x 4.5cm x 4cm
  • Weight: 460 grams
  • Operating temperature: -20 °C to 65 °C
  • Water resistant: ---
  • Power supply: 5V / 1A
  • Power connector: Type-C USB / USB-C
  • Rear camera connection: is product
  • Interior camera connection: ---
  • Battery: not available; capacitors
  • Country of origin: China
  • Manufacturer: VIOFO
  • Model number: ‎ A229 Plus / Pro Rear Camera

Note 1:

If you want to use a Type-C port on the rear-view mirror or in the car for power supply, you will need an additional USB-C to USB-A adapter for the original VIOFO USB-C cable. The USB-C adapter must be connected to the car's port. USB-C to USB-A and then USB-A to USB-C cable can be used; with a direct connection from the car's USB-C port to the dashcam, it will not start.

Note 2:

To ensure that the camera works properly, please use the original VIOFO cable / VIOFO car charger cable. You can also avoid interference from the original SD cards.

Note 3:

In parking mode, we recommend using VIOFO Hardwire Kit cable to power the camera. If a power bank is used to power the parking mode, it may cause the parking mode to be unstable.

recommendations for you

last seen