VIOFO Hardwire Kit (HK3 FULL-SET) for A119 V3 and A129 Series

Roll over image to zoom in Click on image to zoom

VIOFO Hardwire Kit (HK3 FULL-SET) for A119 V3 and A129 Series

Name: VIOFO Hardwire Kit (HK3 FULL-SET) for A119 V3 and A129 Series
Brand: VIOFO
SKU: VO-HWK-3-FL
Price: 25.16 EUR
Availability: InStock

VIOFOSKU: VO-HWK-3-FL

Price:

25,16€ EUR

Tax included Shipping calculated at checkout

Quantity:

Pickup available at Lager Berlin

Usually ready in 24 hours

Share this product

With this hardwire kit you can use the dashcamConstantly supply with electricity. So you can also leave the camera on at night. This kit is for vehicles withVoltage levels from 12 to 24 voltsSuitable.

Thanks to ACC Detection, this hardwire kit immediately detects whether the car is parked.

Then the dashcam switchesAutomatically into the parking modeSo that the dashcam remains on! As soon as the vehicle is restarted, the dashcam switches to normal power. This function isOnly suitableFor the VIOFO A129 Plus (IR) Single / Duo, the VIOFO A129 Single / Duo Pro, VIOFO A119 V3 and the VIOFO A129 (Duo)!

The Hardwire KitSupports three parking mode typesAs well as automatic event detection, time-lapse, and low-bitrate recording. The hardwire kit works until the percentage of the car battery falls below a certain value (customizable), then the dashcam turns off.

Notes:

Order this hardwire kit only for the VIOFO A129 Plus (IR) Single / Duo, the VIOFO A129 Single / Duo Pro, VIOFO A119 V3 and the VIOFO A129 (Duo)!

For the other VIOFO models, you can use theAlternative kitsOrder.

The backup attachments areHereIncluded
(Two attachments per type are required for operation)
We recommend that theInstallation of the hardwire kit is carried out by a specialist workshop.

Details

Cable length: 13.1 feet / 4 meters
Adjustable low voltage protection feature that cuts off power to your dash cam when it detects that the vehicle battery voltage is below the set number.
With ACC detection, the dash cam will automatically switch to parking mode when the vehicle engine is turned off and return to normal recording once the vehicle engine is turned on.
Supports three parking recording modes: automatic event detection, time lapse and low bit rate recording.

1x Hardwire kit (HK3)

1x Instructions

4x different types of safety attachments (two of each type)

1x packaging box

Full 24 months warranty , email replies within 24 hours and 100% satisfaction guaranteed.

Cable length: 13.1 feet/ 4 meters
Dimensions (LxWxH): 8.50 cm x 13.50 cm x 5 cm
Weight: 230 grams
Operating temperature: -20 °C to 65 °C
Water resistant: ---
Power input: DC 12-24V
Power output: 5V / 2A
Power connector: Mini-USB / TYPE USB-Mini
Rear camera connection: ---
Interior camera connection: ---
Battery: not available; capacitors
Country of origin: China
Manufacturer: VIOFO
Model number: HK3

Note 1:

If you want to use a Type-C port on the rear-view mirror or in the car for power supply, you will need an additional USB-C to USB-A adapter for the original VIOFO USB-C cable. The USB-C adapter must be connected to the car's port. USB-C to USB-A and then USB-A to USB-C cable can be used; with a direct connection from the car's USB-C port to the dashcam, it will not start.

Note 2:

To ensure that the camera works properly, please use the original VIOFO cable / VIOFO car charger cable. You can also avoid interference from the original SD cards.

Note 3:

In parking mode, we recommend using VIOFO Hardwire Kit cable to power the camera. If a power bank is used to power the parking mode, it may cause the parking mode to be unstable.

VIOFO Hardwire Kit (HK3 FULL-SET) for A119 V3 and A129 Series

Description

Thanks to ACC Detection, this hardwire kit immediately detects whether the car is parked.

Details

Note 1:

Note 2:

Note 3:

VIOFO Hardwire Kit (HK3 FULL-SET) for A119 V3 and A129 Series

recommendations for you

last seen