VIOFO RWC200 waterproof rear view camera with cable and adhesive pads

VIOFOSKU: VO-RWC200-HK7.5M-1CH

Price:
Sale price$78.33 USD

Shipping calculated at checkout

If you don't want it to be waterproof, you can find the simple rear camera here:

Pickup available at Lager Berlin

Usually ready in 24 hours

Description

  • complex 1440p resolution
  • Weatherproof rear view camera with STARVIS 2 IMX675 and HDR
  • High resolution, IP67 waterproof, easy installation with adhesive pads
  • suitable for most vehicles, such as RV, minivan, pickup, etc.
  • ideal choice if there is no open rear window
  • Waterproof design: The VIOFO RWC200 is IP67 waterproof certified, which means it will work reliably even in heavy rain and adverse weather conditions. You no longer need to worry about your camera's performance in wet conditions.
  • Excellent image quality: Equipped with a high-quality sensor, the RWC200 delivers clear and detailed images that help you detect obstacles and dangers behind your vehicle early. The camera supports a high resolution that ensures good visibility even in poor lighting conditions.
  • Easy installation: The RWC200 comes with all necessary cables and robust adhesive pads that allow for secure attachment to your vehicle. The detailed instructions make installation easy, even if you are not a tech expert.
  • Wide field of view: With a wide viewing angle, the camera captures a large area behind your vehicle, minimizing blind spots and maximizing safety when reversing.
  • compatibility: The VIOFO RWC200 is compatible with a wide range of vehicle types and can be easily connected to existing dash cam systems or monitors, making it a versatile solution for different vehicle models.
  • Durability and reliability: The camera's robust construction ensures a long service life and reliable performance, even under demanding conditions. This makes it a worthwhile investment for every vehicle owner
  • Sony STARVIS 2 IMX675 image sensor
  • Quad HD resolution at 30 frames per second
  • IP67 certification
  • waterproof
  • HDR compatible
  • Only compatible with VIOFO A229 Plus and A229 Pro, not compatible with VIOFO A229 Duo
  • If you have an A229 Plus/A229 Pro 2CH or 3CH dash cam, using the rear camera will occupy the Type-C port of the main front camera where the rear camera would normally be connected.

1x RWC 200 rear view camera + 0.5 m cable

1x 7.5 m rear camera cable

1x replacement adhesive pads

2x screws for fastening

1x packaging box

Full 24 months warranty , email replies within 24 hours and 100% satisfaction guaranteed.

  • Channel: 1-Channel
  • Resolution: 1440p at 30 frames per second
  • Image sensor: Sony STARVIS 2 IMX675
  • Lens: Fx.x Aperture
  • Chipset: ---
  • HDR: Supported
  • Shooting angle: ??? degrees
  • LCD screen: ---
  • GPS receiver: ---
  • G-Sensor: ---
  • Motion detection: Built-in
  • Parking mode: Available
  • Loop recording mode: Supported
  • Bluetooth-compatible: ---
  • WLAN frequency: ---
  • Voice control: ---
  • Voice notification: ---
  • Microphone: ---
  • Speaker: ---
  • Memory card: ---
  • Video output: 8-pin connector round
  • Frequency: 50Hz / 60Hz
  • Video format: H.264
  • Cable length: 24.61 feet / 7.5 meters + 1.64 feet / 0.5 meters
  • Dimensions (LxWxH): xx.xx cm x xx.xx cm x xx.xx cm
  • Weight: xxx grams
  • Operating temperature: -20 °C to 65 °C
  • Waterproof: yes
  • Power supply: 5V / 3.1A
  • Power connector: 8-pin round connector to USB-C
  • Rear camera connection: is product
  • Interior camera connection: ---
  • Battery: not available; capacitors
  • Country of origin: China
  • Manufacturer: VIOFO
  • Model Number: VIOFO RWC200

Note 1:

If you want to use a Type-C port on the rear-view mirror or in the car for power supply, you will need an additional USB-C to USB-A adapter for the original VIOFO USB-C cable. The USB-C adapter must be connected to the car's port. USB-C to USB-A and then USB-A to USB-C cable can be used; with a direct connection from the car's USB-C port to the dashcam, it will not start.

Note 2:

To ensure that the camera works properly, please use the original VIOFO cable / VIOFO car charger cable. You can also avoid interference from the original SD cards.

Note 3:

In parking mode, we recommend using VIOFO Hardwire Kit cable to power the camera. If a power bank is used to power the parking mode, it may cause the parking mode to be unstable.

recommendations for you

last seen