VIOFO Hardwire Kit (HK5) for VS1 Mini (90° USB-C connector)

Roll over image to zoom in Click on image to zoom

VIOFO Hardwire Kit (HK5) for VS1 Mini (90° USB-C connector)

Name: VIOFO Hardwire Kit (HK5) for VS1 Mini (90° USB-C connector)
Brand: VIOFO
SKU: VO-HK-5
Price: 19.95 EUR
Availability: InStock

VIOFOSKU: VO-HK-5

Price:

19,95€ EUR

Tax included Shipping calculated at checkout

Quantity:

Pickup available at Lager Berlin

Usually ready in 24 hours

Share this product

With this hardwire kit you can provide the dashcam with a constant power supply . This means you can leave the camera switched on even at night. This kit is suitable for vehicles with voltage levels of 12 to 24 volts .

This hardwire kit immediately detects whether the car is parked thanks to ACC Detection.

Then the dashcam automatically switches to parking mode so that the dashcam stays on! As soon as the vehicle is started again, the dashcam switches to normal power supply. This function is only suitable for the VIOFO VS1 Mini.

The hardwire kit supports three parking mode types as well as automatic event detection, time lapse and low bit rate recording. The hardwire kit will work until the car battery percentage drops below a certain level (customizable), then the dash cam will turn off.

Hints:

Order this hardwire kit only for the VIOFO VS1 Mini !

For the other VIOFO models you can order the alternative kits .

The safety attachments are not included as standard
(two attachments are required for operation)

Please select the fuse type you require (you can check the correct option with your local car dealer).
If you are not sure what type your vehicle has, consider the set with the 4 different fuses .

We recommend that the installation of the hardwire kit be carried out by a specialist workshop.

Details

Cable length: 13.1 feet / 4 meters
Adjustable low voltage protection feature that cuts off power to your dash cam when it detects that the vehicle battery voltage is below the set number.
With ACC detection, the dash cam will automatically switch to parking mode when the vehicle engine is turned off and return to normal recording once the vehicle engine is turned on.
Supports three parking recording modes: automatic event detection, time lapse and low bit rate recording.

1x Hardwire kit (HK5)

1x Instructions

Full 24 months warranty , email replies within 24 hours and 100% satisfaction guaranteed.

Cable length: 13.1 feet / 4 meters
Dimensions (LxWxH): 8.50 cm x 13.50 cm x 5 cm
Weight: 160 grams
Operating temperature: -20 °C to 65 °C
Water resistant: ---
Power input: DC 12-24V
Power output: 5V / 2A
Power connector: Type-C USB / USB-C
Rear camera connection: ---
Interior camera connection: ---
Battery: not available; capacitors
Country of origin: China
Manufacturer: VIOFO
Model number: HK5

Note 1:

If you want to use a Type-C port on the rear-view mirror or in the car for power supply, you will need an additional USB-C to USB-A adapter for the original VIOFO USB-C cable. The USB-C adapter must be connected to the car's port. USB-C to USB-A and then USB-A to USB-C cable can be used; with a direct connection from the car's USB-C port to the dashcam, it will not start.

Note 2:

To ensure that the camera works properly, please use the original VIOFO cable / VIOFO car charger cable. You can also avoid interference from the original SD cards.

Note 3:

In parking mode, we recommend using VIOFO Hardwire Kit cable to power the camera. If a power bank is used to power the parking mode, it may cause the parking mode to be unstable.

VIOFO Hardwire Kit (HK5) for VS1 Mini (90° USB-C connector)

Description

This hardwire kit immediately detects whether the car is parked thanks to ACC Detection.

Details

Note 1:

Note 2:

Note 3:

VIOFO Hardwire Kit (HK5) for VS1 Mini (90° USB-C connector)

recommendations for you

last seen